Bambu Lab P1S Accessories

The P1S ships with tools that have nowhere to live, so they end up scattered across the bench. Frame-mounted caddies keep the scraper, nozzle needle and hex keys with the printer, and everything here fits the 256 × 256 × 256 mm build volume with room to spare.

Fits: Bambu Lab P1S, P1P, and X1 series frames

Make this one yours. Cadio generates it to your measurements — change the size, slot count, or angle by describing what you need.

Customize in Cadio →

Key dimensions

Build volume	256 × 256 × 256 mm
Frame profile	Clips to the extrusion edge
Caddy slots	Scraper, needle, hex keys
Wall thickness	2.5 mm
Print time	Around 2 hours

Print settings

Material	PLA or PETG
Layer height	0.2 mm
Walls	3 perimeters
Infill	20%
Supports	None
Orientation	Clip opening facing up

What actually matters

Print the clip opening facing up so the sprung arms build along their bending direction rather than across it.
PETG for anything mounted on the frame near the hotend side — the enclosure runs warm with the door shut.
Check the clip on a spare piece of extrusion first. A clip that is too tight can mark the frame anodising.

Questions

Will these fit the A1 or A1 mini?

No — the A1 is an open-bed machine with a different frame. Generate the accessory for your specific model instead.

Do frame-mounted parts affect print quality?

Not if they are light and clipped to the frame rather than the gantry. Never mount anything to a moving axis.

Need it in a different size, or with more slots?

Generate your version →