Kitchen Tablet Stand

Following a recipe on a tablet flat on the counter means leaning over it with floury hands. A stand at around 60° puts it at a readable angle, and a wide base keeps it stable when you tap the screen.

Fits: Tablets 7–13 inches, with case

Make this one yours. Cadio generates it to your measurements — change the size, slot count, or angle by describing what you need.

Customize in Cadio →

Key dimensions

Angle	60°
Lip depth	18 mm — clears a chunky case
Base	180 × 130 mm
Cable channel	For charging while in use
Surface	Smooth, wipeable

Print settings

Material	PETG — kitchen surfaces get wiped and warm
Layer height	0.2 mm
Walls	3 perimeters
Infill	20%
Supports	None
Orientation	Back face on the bed for a smooth front

What actually matters

Deeper lip than a phone stand. A tablet in a case needs about 18 mm or it tips forward.
Wide base. You tap a tablet screen harder than you think and a narrow base rocks every time.
Print the front face against the bed for a smooth, wipeable surface — textured surfaces trap kitchen grease.

Questions

Will it hold a big tablet?

Up to 13 inches with a wide base. Larger needs a deeper footprint to stay stable.

Can I wall-mount it instead?

Generate a wall-mounted version — the geometry is different from a freestanding stand.

Need it in a different size, or with more slots?

Generate your version →